McIntosh MTI 100
McINTOSH MTI100 est un autre de ces appareils un peu fous proposés par le constructeur américain. Il s'agit d'une platine vinyle équipée d'un ampli Classe D de 2 x 80 Watts RMS et d'un récepteur Bluetooth. Il suffit de lui associer une paire d'enceintes pour en faire une chaîne complète. C'est une combinaison idéale pour qui veut retrouver l'univers McIntosh dans une maison de vacances ou une pièce secondaire.
Caractéristiques constructeur:
Cartridge Specifications
- Cartridge Type
- Moving Magnet
- Output Level
- 4mV at 1kHz
- Load Impedance
- 47k Ohms
- Frequency Response
- 12Hz to 30kHz
- Channel Separation
- 30dB at 1kHz
- Compliance
- 12 x 10-6 cm/dyne
- Recommended Tracking Force
- 2.0 g
- Channel Difference
- Less than 1dB at 1kHz
- Total Mass
- 6.5 g
- Stylus
- Elliptical
- Cantilever Material
- Aluminum
Tonearm Specifications
- Bearing
- Lateral type bearing
- Arm Tube
- Damped machined aluminum
- Counterweight
- Concentric
- Adjustments
- None
Turntable Specifications
- Playback Speeds
- 33-1/3 and 45 rpm
- Motor Type
- Permanent magnet AC synchronous
- Speed Control
- Manual speed change via a 2 speed pulley
- Platter
- Aluminum
- Platter Bearing
- Oil bath bearing with a high performance polyetheretherketone (PEEK) thrust disc and machined graphite impregnated brass bushings
- Signal To Noise Ratio
- 35dB - 40dB
- Wow & Flutter
- 0.1%
Connectivity
- Stereo Outputs Unbalanced
- 1 (bridged to AMP IN)
- Stereo Inputs Unbalanced
- 1
- Digital Coaxial Input
- 1
- Digital Optical Input
- 1
- Subwoofer Output
- 1
- Wireless Input
- High Definition Bluetooth 4.2
Control
- Power Control Input
- 0
- Power Control Output
- 1
- Platter Light
- N/A
- Speed Control Fine Adjustment
- No
Electronic Specifications
- Power Output per Channel
- 50 Watts into 8 Ohms
80 Watts into 4 Ohms
- Number of Channels
- 2
- Speaker Impedance
- 4 or 8 Ohms
- Rated Power Band
- 20Hz to 20kHz
- Total Harmonic Distortion
- 0.5% (Amplifier)
0.2% (Preamplifier)
- Dynamic Headroom
- 1.0dB (8 Ohms)
1.3dB (4 Ohms)
- Frequency Response +0,-0.7dB
- 20Hz to 20kHz
- Signal To Noise Ratio (Moving Magnet)
- 75dB
- Signal To Noise Ratio (High Level)
- 90dB
- Damping Factor
- 8 Ohms: >200
4 Ohms: >100
- Maximum Output (Balanced / Unbalanced)
- 9V Unbalanced
General Specifications
- Dust Cover Included
- No
Weights & Dimensions
- Unit Dimensions (W x H x D)
- 19-1/4” (48.9cm) x 6-3/4” (17.15cm) x 14” (35.6cm)
- Unit Weight
- 33.5 lbs (15.2 kg)
- Shipping Weight
- 40.5 lbs (18.4 kg)