- -524,00 €
Audioquest Diamond Coaxial Numérique
En stockAUDIOQUEST DIAMOND COAX est un câble de liaison numérique de très haut de gamme. Il peut paraître un peu fou d'investir 1000 euros dans un câble numérique, mais Audioquest Diamond a tous les arguments techniques pour justifier un tel tarif : câble en argent pur, système de réduction de bruit par 6 feuilles carbone, polarisation DBS 72 V. Et puis en fin de compte, ce sont vos oreilles qui décideront. Nous le tenons en stock en 1m et 2m.
Données constructeur
Hard-Cell Foam Insulation
Hard-Cell Foam (HCF) Insulation ensures critical signal-pair geometry. Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. Hard-Cell Foam Insulation is similar to the Foamed-PE used in our more affordable Bridges & Falls cables, and is nitrogen-injected to create air pockets. Because nitrogen (like air) does not absorb energy and therefore does not release any energy from or into the conductor, distortion is reduced. In addition, the stiffness of the material allows the cable's conductors to maintain a stable relationship along the cable's full length, producing a stable impedance character and further minimizing distortion.
Solid Perfect-Surface Silver (PSS) Conductors
Perfect-Surface Technology applied to extreme-purity silver provides unprecedented clarity and dynamic contrast. Perfect-Surface Silver (PSS) is AudioQuest's highest-quality metal. Solid conductors prevent strand interaction, a major source of cable distortion. Extremely high-purity Perfect-Surface Silver minimizes distortion caused by the grain boundaries that exist within any metal conductor, nearly eliminating harshness and greatly increasing clarity compared to OFHC, OCC, 8N and other coppers.
Carbon-Based 6-Layer Noise-Dissipation System (NDS)
It's easy to accomplish 100% shield coverage. Preventing captured Radio Frequency Interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation System (NDS). Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes a distortion of the signal. NDS's alternating layers of metal and carbon-loaded synthetics "shield the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground.
Silver-Plated Braid Shield
Cold-Welded, Hanging-Silver Directly Over Pure Red Copper Terminations
Dielectric-Bias System with Radio Frequency Trap
All insulation between two or more conductors is also a dielectric whose properties will affect the integrity of the signal. When the dielectric is unbiased, dielectric-involvement (absorption and non-linear release of energy) causes different amounts of time delay (phase shift) for different frequencies and energy levels, which is a real problem for very time-sensitive multi-octave audio. The inclusion of an RF Trap (developed for AudioQuest’s Niagara Series of power products), ensures that radio-frequency noise will not be induced into the signal conductors from the DBS field elements. (DBS, US Pat #s 7,126,055 & 7,872,195 B1)
Fiche technique
- Origine
- USA et Canada
- Fabrication
- Chine
- Disponibilité
- En stock
AUDIOQUEST DIAMOND COAX est un câble de liaison numérique de très haut de gamme. Il peut paraître un peu fou d'investir 1000 euros dans un câble numérique, mais Audioquest Diamond a tous les arguments techniques pour justifier un tel tarif : câble en argent pur, système de réduction de bruit par 6 feuilles carbone, polarisation DBS 72 V. Et puis en fin de compte, ce sont vos oreilles qui décideront. Nous le tenons en stock en 1m et 2m.